ES OPTRONICS LIMITED
ES OPTRONICS LIMITED
Add to Cart
IPS LG Monitor Panel 16:9 Hard Coating Lightweight 1920×1080 For Desktop
The LD550EUE is a Color Active Matrix Liquid Crystal Display with an integral Light Emitting Diode (LED) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive display type which is operating in the normally black mode. It has a 54.64 inch diagonally measured active display area with WUXGA resolution (1080 vertical by 1920 horizontal pixel array). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arrayed in vertical stripes. Gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot. Therefore, it can present a palette of more than 16.7Milion colors. It has been designed to apply the 8-bit 2-port LVDS interface. It is intended to support Commercial Display where high brightness, super wide viewing angle, high color gamut, high color depth and fast response time are important.
LG Display LD550EUE-FHA1 Application Features
| Basic Information : | Manufacturer | Panel Model | Panel Type | Alias |
|---|---|---|---|---|
|
| LD550EUE-FHA1 | a-Si TFT-LCD , LCM | LD550EUE (FH)(A1) | |
| Environment : | RoHS State | Operating Temp. | Storage Temp. | Vibration Level |
|
| 0 ~ 50 °C | -20 ~ 60 °C | - | |
| Used For : | | |||
| Specific Features : | | |||
| Remarks : | Integrated “Black” bezel | |||
LG Display LD550EUE-FHA1 Mechanical Features
| Panel Size : | 55" | |||
|---|---|---|---|---|
| Pixel Features : | Pixel Format | Pixel Configuration | Pixel Pitch (mm) | Dot Pitch (mm) |
| 1920(RGB)×1080 [FHD] | RGB Vertical Stripe | 0.630×0.630 | 0.210×0.630 | |
| Mechanical Size : | Active Area (mm) | Bezel Area (mm) | Outline Dimension (mm) | Outline Depth (mm) |
| 1209.6(H) × 680.4(V) | 1214.2(H) × 685.0(V) | 1232(H) × 708.9(V) | 17.0/28.6 (Typ./Max.) mm | |
| Outline Features : | Form Factor | Orientation | Aspect Ratio | Shape Style |
| Flat Rectangle | Landscape / Portrait | 16:9 (H:V) | - | |
| Other Detail : | Weight | Panel Cover | Treatment | |
| 13.0/13.7Kgs (Typ./Max.) | - | Antiglare (Haze 1%), Hard coating (3H) | ||
Mounting Precautions
(1) You must mount a module using specified mounting holes (Details refer to the drawings).
(2) You should consider the mounting structure so that uneven force (ex. Twisted stress, Concentrated stress) is not applied to the module. And the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module.
(3) Please attach the surface transparent protective plate to the surface in order to protect the polarizer. Transparent protective plate should have sufficient strength in order to the resist external force.
(4) You should adopt radiation structure to satisfy the temperature specification.
(5) Acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction.
(6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than HB pencil lead. And please do not rub with dust clothes with chemical treatment. Do not touch the surface of polarizer for bare hand or greasy cloth.(Some cosmetics are detrimental to the polarizer.)
(7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzine. Normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. Do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer
(8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causes deformations and color fading.
(9) Do not open the case because inside circuits do not have sufficient strength.
ES OPTRONICS GROUP is the world's leading large-scale LCD brand distributors in the field for many years, group accumulated including mainland,Europe and the United States,Japan and South Korea, Taiwan and other long-term stable partners, with the "integrity management" Concept valued high degree recognition of partners.
ES OPTRONICS GROUP have set branch offices in Shenzhen and Shanghai , through high-quality LCD screen products and display solutions to help major enterprises in the terminal equipment display and touch control, the LCD products have been widely used in automotive, medical, military, intelligent transportation , Security, industrial site, commercial display, TV / DT and other industries.
