ES OPTRONICS LIMITED
ES OPTRONICS LIMITED
Add to Cart
P320HVN02 0 AUO LCD Screen RGB Full Color Lightweight For Digital Signage LVDS
The quantum dot wide color gamut technology has its relevant panel design adjusted according to quantum dot characteristics for optimum color performance. The color saturation exceeds NTSC 100%, displaying precise coloring and wider color gamut, with rich gradation even in the tiniest detail. The HDR technology with high contrast ratio enhances finer details against dark and bright backgrounds, presenting more color depth.
| Manufacturer | AUO |
| Technology | TFT |
| Size Diagonal | 31.5″ (80.01 cm) |
| Resolution (max) | 1920×1080 |
| Brightness [cd/m2] | 500 |
| Backlight | LED |
| Converter | Integrated |
| Viewing angle v/h | 178°/178° |
| Temperature Range Top | -0…+50°C |
| Temperature Range Tst | -20…+60°C |
| Interfaces | LVDS |
| Dimensions (LxWxD) | 719.2 x 413.7 x 24.8 |
This specification applies to the 31.5 inch Color TFT-LCD Module P320HVN02.0 This LCD module has a TFT active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 31.5 inch. This module supports 1,920x1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot.
The P320HVN02.0 has been designed to apply the 8-bit 2 channel LVDS interface method. It is intended to support applications such as shopping window, exhibition cabinet, vending machine, etc.
AUO P320HVN02.0 General Features
|
Brand |
AUO |
Model |
P320HVN02.0 |
|---|---|---|---|
|
Diagonal Size |
31.5 inch |
Type |
a-Si TFT-LCD , LCM |
|
Pixel Format |
1920(RGB)×1080 [FHD] |
Configuration |
RGB Vertical Stripe |
|
Active Area |
698.4(H)×392.85(V) mm |
Outline Dim. |
719.2(H)×413.7(V) ×24.8(D) mm |
|
Bezel Area |
703.4(H)×397.9(V) mm |
Treatment |
Antiglare (Haze 2%), Hard coating (3H) |
|
Luminance |
500 cd/m² (Typ.) |
Contrast Ratio |
3000:1 (Typ.) (TM) |
|
View Direction |
Symmetry |
Response Time |
8 (Typ.)(G to G) |
|
Viewing Angle |
89/89/89/89 (Typ.)(CR≥10) |
Operating Mode |
AMVA3, Normally Black, Transmissive |
|
Support Color |
16.7M 72% (CIE1931) |
Light Source |
WLED , 50K hours , With LED Driver |
|
Weight |
4.59Kgs (Typ.) |
Designed For |
Digital Signage
|
|
Frame Rate |
60Hz |
Touch Panel |
Without |
|
Interface Type |
51 pins LVDS (2 ch, 8-bit) , Connector |
||
|
Power Supply |
12.0V (Typ.) |
||
|
Environment |
Operating Temperature: 0 ~ 50 °C ; Storage Temperature: -20 ~ 60 °C |
||
AUO P320HVN02.0 Mechanical Features
|
Screen Size : |
31.5 inch |
|||
|---|---|---|---|---|
|
Pixel Features : |
Pixel Number |
Pixel Format |
Dot Pitch (H×V) |
Pixel Pitch (H×V) |
|
1920(RGB)×1080, FHD |
RGB Vertical Stripe |
0.12125×0.36375 mm |
0.36375×0.36375 mm |
|
|
Mechanical Size : |
Display Area (H×V) |
Bezel Opening (H×V) |
Overall Dimension (H×V) |
Overall Depth |
|
698.4×392.85 mm |
703.4×397.9 mm |
719.2×413.7 mm |
16.8/24.8 (Typ./Max.) mm |
|
|
Outline Features : |
Form Shape |
Aspect Ratio (H:V) |
Orientation |
Shape Style |
|
Flat Rectangle |
16:9 |
Landscape / Portrait |
- |
|
|
Other Spec : |
Mass |
Panel Cover |
Surface Treatment |
|
|
4.59Kgs (Typ.) |
- |
Antiglare (Haze 2%), Hard coating (3H) |
||
Handing Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was taken
out from the container, do not press the center of the LED lightbar edge. Instead, press at the
far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption.
13) Pls avoid touching COF position while you are doing mechanical design.
14) When storing modules as spares for a long time, the following precaution is necessary: Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature between 5℃ and 35℃ at normal humidity.